Tools and stuff you need: - hexagon socket screw keys: 1.5 mm, 2.5 mm, 4 mm
- screw-wrench: 5.5mm (recommended), 8mm, 10mm (x2 recommended), 13mm (x2)
...
These instructions are copied from 1.0, and need to be updated for version 1.1 X Drive box Assembly
This part will slide on the ...
Extruder assembly First, you need attach the pinion gear to the DC motor. Slide the pulley all the way down the motor shaft ...
Prepare the bed plate
This is the bed plate: 
Add the four feet in the kit to form a square. ...
Y drive peparations
1. Bearing support
You will need these parts: 
Those will hold one 608 ball bearing each and ...
Installing the Extruder
Preparing the extruder barrel
The extruder will come like this: 
The black wires are the heater wires, ...
This paragraph is currently missing documentation and/or pictures. X MIN/MAX Use 2 5mm plastic spacers under each pin. 
Z MIN ...
Troubleshooting
Somethings missing? Broke something?
Write a email to info@gli-concept.de with a short description of the problem. We'll help you. Every ...
