After your Shapercube package arrive, make sure all parts are in it. For the aluminium parts a copy of the drawings are inside the package. ...
Cleaning up the parts
Skip to next paragraph if you ordered glass bead blasting
Caution! The edges of the water-jet cut parts are slightly ...
Cutting the cables to length
4-pin cable
Cut about ~53 cm for Y motor ~85 cm for X motor Rest for DC & heater. ...
Note: If you ordered Shapercube without electronics, this step will probably differ from what you need. The stepper motors shipped will come like ...
Preparing the couplings
You will need to make 3 couplings. For each coupling, you will need thoes two parts: 
Important: Those parts ...
