These instructions are copied from 1.0, and need to be updated for version 1.1

X Drive box Assembly

This part will slide on the ...

FIXME

The slots in the X rod mounting plate should go the other way around.

This

...

This part need to be made twice for both X drive box and X idler box.

...

You will need four parts of this.

...

Note: The white parts on the pictures are prototypes made by a Shapercube in ABS plastic and are probably a bit thicker than the water-jet ...

You will need one ~33cm threaded rod and one ~40cm threaded rod. Attach ...